Cuisinart DGB-500 Coffee Maker "motor shaft cover" Questions

...drive shaft and the bottom of the grinder. then use a trace of vegetable oil to lubricate the motor shaft where is attaches to the grinder. We are on our second coffee maker and it makes great

...motor shaft will not turn at all. It appears that the motor has "seized". Where can I purchase a new motor. How does the outer plastic cover come off? Thank you for your anticipated answer. Hi Remove ...

...motor shaft and the cold releases it). If you can get it out, call customer service (800-726-0190) for a new grinder, and if it's under 3 yrs old it might be covered under their warranty (but you can ...

...shaft should in the Up position At times, the gears in the brew drive assembly will not complete the cycle to the proper start position for different reasons. Some of the reasons are: ? Brew group ...

...shaft was stuck so the plastic gear connected with motor by belt at the bottom of machine is cracked. You need to 1. use security star torx bit to open the bottom 2. Dismount the motor 3. Disconnect ...

...motor shaft, which has a slot in it. By inserting a flat blade screwdriver into the slot and holding the cutting blades with a rag or a wad of paper towel to avoid cutting one's fingers, it is ...

...shaft underneath, paying attention to which way up it goes for reassembly. Frothing jug For milk frothing issues, soak the milk jug cover in hot water and rinse several times. If it has a froth ...