Cuisinart DCC-1200 Coffee Maker "water heat cup lights flashing" Questions

...and its taking a long time to brow as well making a lot of noise Also when the add water and the small cup light flashes the heating light flashes as well. Great Solution now compete and all is

...water, heating, and small cup light flashing My add water light, my heating light, and the small cup light are all flashing. Power light stays on. It will brew after I cycle the power but I'm ...

...of place. Nothing will work until everything is in place and locked. Steady water light means it needs to be primed, (run water by opening the steam knob). It won't heat until the boilers are

cup, add water, heating lights keep flashing after brew I had this problem too. I just pressed the small brew button; it pulled some water from the reservoir and heated it but nothing came out. Then I

...water, small cup light and heating light flash - sometimes pressing the small cup light resets it - other times it has to be unplugged and plugged in and sometimes either or both have to be done more ...

...water and the HEATING light will flash. 2 Place a clean cup on the cup stand, adjusting the height of the stand up or down so that the rim of the cup is close to the brew mechanism. ? To adjust the ...

...ARGH! Hi, Try to open the steam knob and make a cup of water (tea), see if you can get a full cup or just a half. How old are your machine? How often do you descale the machine? Best regards ...

...heat water i tried to use the coffee machine straight out of the box(as i did not know it needed to be flushed)it did not heat the water and when i tried flush it after, it didn't do anything No need ...

...on - no "flashing" like it says in directions. I can see that some water is gone from the resevoir and the back of the brewer feels warm. But after more than a half hour - nothing brewing into my