Cuisinart DCC-1200 Coffee Maker "ball check valve" Questions

check ball! about 1/8 inch dia. 4) Yep, that check-valve was thoroughly gunked up with charcoal from the filter! Somehow I didn't lose the ball. The "X" end of the checkvalve should face the underside

...ball inside the plastic stop/check valve, while noting which way the stop-check valve is oriented in the hose.6.  Cut two pieces of your food-grade / temperature resistant silicone tubing that ...

...check valve out of the tube and remove any debris that may have become lodged in the valve. You may need to remove the plastic ball from the three prong holder to do so. Do not use any sharp metal ...

check valve. This valve sticks now and then. Lift the handle to open position. You need to remove the long black cover between handle to expose valve. There are two silverish screws upside down by top

...the water in one direction. I suspect this check valve's ball is not moving (which is required)... look for a strange-looking (wider than other tubes) device in the water path...maybe part of a

...check ball in the pump assembly (brass tube) gets stuck. It can be unstuck by disasdsembly or high pressure air application.Unplug unit before opening the top or any inspection. The brass tube ...

...CHECK BALL in the right place. I put the check ball in and the fat part of the spring down first and it clogged the "exitway" for the coffee. I think the spring should be the other way, with the ball ...

...ball. Any ideas? All Expresso machines have hoses that carry the water from the reservoir to the dispensing valve. These get old and cracked or clogged over time. Try to locate the owners manual on ...

...check valve in it. TYou can squeeze the hose about an inch down and feel it to determine which hose its in. Pushed the valve out with a screw driver over a towl so if the little ball fell out I ...

ball in the check valve that makes up the pump. Your pump isn't pumping. I suspect you have some particulate matter that has made its way to the primitive check valve and the ball is not moving freely