...I have lack of pressure and the pump is not 6 months old The pump is not properly primed due to suction leaks. Check for leaks in your suction line. Check also the integrity of your suction check ...
...the line, it must hit a 90 degree corner, any help out there....??????? Is the obstruction on hte suction side or supply side of the pump? Either way, you can disconnect the pump, and work from ...
wont pump water 1. Suction strainer with checkvalve must be always under water. 2. Check the suction checkvalve if holds water. Water must remain steady when primed. 3. Open the priming port, and fill
...looks like the currant model.just got it and they didnt have instructions bugger. We begin at the suction line. I'll assume that you will be using this as a pool pump since you have a filter. At
...the pump is making heavy noise (like it is pumping gravel) this is typically due to lack of NPSH (suction condition) If this is the case you may be lifting the water too high (suction lift) or the ...
will not prime My pump didn't pump until I filled the 'suction side' pipe with water before I attached the pipe to the pump. The suction pipe needs a foot valve if you have a long lift from the water ...
UVC4 SYKES PUMP MANUAL Go here and contact the manufacturer for that:http://www.sykesgroup.com/
pace 3/4 hp flotec pump - is pumping water - not a steady stream ? Re prime the pump. Make sure the suction line is completly flooded so it will take a good suction from the well
...are always full of air. I have a shallow well pump, and air tank. Dan You have air getting into you suction line somewhere. Or the foot valve in your well is not holding the water in the suction line ...
...if you can provide more information such as model number, and installation details, i.e. flooded suction or suction lift, how high etc etc. Given this detail we can be of assistance to you. ...
3 questions posted
Usually answered in minutes!
1 Questions