i overhauled carb ,no instructions on factory settings,adjustments are out of wack ,used info from my manual but its limited ,i neeed a start point on all adjustments can you help Normally the ...
I have a Briggs& Stratton model 130232 which is backfiring. How do I adjust the ignition or can anyone suggest any other cause? Thanks If this engine has points, it may be a bad condenser.
...&stratton and the i have bought a 5 hp.briggs&stratton and the instructions say to adjust the static govenor .does it come factory set or what should i do to adjust it? my advise is ...
Question about Briggs & Stratton Hammering
...and Statton I have a tank mounted carby type Briggs and Statton mower and cannot find any air fuel adjustment. it should be right below the link to the choke rod if not what is the engine ...
...on the side of the motor and controls a flappervalve downstream of the carb was replaced and the adjustment of this screw/linked to the flapper via linkage with a spring is adjustable,(What does ...
...8 hours) And then clean it off with carb cleaner and re-install it. I honestly think you have a simple case of too much oil in the engine. Adjust the oil level to the proper levels and try again. It ...
...engine over, I get one strong spark then nothing. Pulled ignition component cover and points (Breaker in nomenclature) appears clean and not pitted. Have not tried to adjust. Turning over see weak, ...
149 questions posted
Usually answered in minutes!
41 Questions
49 Questions
48 Questions
34 Questions