Question about Air Tools & Compressors
Electric Bosch hand held orbital sander belt not rotating properly I was just about to do some sanding with a hand held orbital sander (bosch 150w) and it worked for a second, then the belt inside ...
lost bearing WHERE IN TRACY,CA. CAN I BUY A BALL BEARING PART #CA145107 FOR A 6'' DAYTON ORBITAL SANDER MODEL #4CA38? THANK YOU. I would try the automotive paint store, as they carry parts here in ...
Question about Dynabrade Air Tools & Compressors
A friend gave me a 210055 3/32 Sander. I would like to get a manual for it. Hi vepa, my name is John. Welcome to FixYa. You can get it here. www.mastertoolrepair.com . Thanks for choosing FixYa...John
Air Sander Question what do I need speed control for? When you are finishing the surface of wood, it's vital to maintain control. Work too fast or too slow and you risk ruining your hard work with ...
I have 5" Dynabrade Orbital sander that needs a new sanding pad and could probably use a going over at the same time. Who does this work? Cost You can get new pads at the automotive paint stores in ...
Dynabrade sander doesn't spin This is a 5" Dyna Brade sander and it barely spins, supposed to do 10,000 rpm check the exhaust muffler. or just take it off and see what happens. there is usually an ...
Question about Dynabrade Air Tools & Compressors
as soon as i apply my sander to the surface it stops sanding It will seem like it is working ,but as soon as I apply it to any surface it stops. It runs but has no torque. I have had this sander for ...
Question about Sander Air Tools & Compressors
Hello I have a compressor and my electric orbital sander has finally gone legs up. My question is if I get an air sander primarily for sanding wood is a straight line the best sort to get or are the ...
7 questions posted
Usually answered in minutes!