RTO PasLode 900420 Impulse Framing Nailer  "nail gun trigger working" Questions

...nail gun. I am not an expert but I have used pneumatic nail guns before & have never had this experience. HELP! get a senco It can be confusing these days knowing exactly how each nailer works. For ...

Nail Gun Problem Is there a way to prevent accidentally firing a nail? Professional-grade varieties are automatic, and fire a nail directly upon pulling the trigger. A semi-automatic nail gun is more ...

nail gun correctly. Some people keep the trigger pulled and bounce the gun onto the wood. This technique works okay, but placement accuracy of the nail suffers. The other technique is to place the gun

...work, then depress trigger. If the gun shoots two nails while set to single fire, most likely worn trigger or worn out trigger valve. These parts are not expensive and are easy to replace. Good ...

...nail, only continuos air until I release tyhe trigger. not jammed, gun is clean, very new. acted that way right out of the box then it worked and then not and so on, worked yesterday but not today ...

Nail gun will not shoot a nail air nailer was working fine all morning but then failed to fire additional nails. Air is getting to the nailer but the nailer fails to fire. Check the safety trip make ...

...turns till head of nail is correct when bump firing then lock the nut. The safety foot fits rather loose on the gun and should still work ok but can get so loose that it falls off the nose. Good ...

...gun on the work and pull the trigger. This takes practice while using at an angle.  Works better if the nose piece has rather sharp points to help nose to stay in postion while you bump. ...

...nail gun stop working, pull the trigger air leaks out at trigger area I had a similar problem with one of my nail guns. What I found was a small rubber o-ring in the trigger mechanism had split. Once ...

...nail gun won't discharge a nail Its new never been used. Loaded nails hooked up to compressed air and pushed nose against wood pulled trigger and nothing happened If the trigger is set to single ...