...intermittent or stop firing but the fan still runs, the first the to check is the expiration date on the gas cartridges. The do expire and this will make the gun work inconsistently or not at
Question about Senco Air Tools & Compressors
...flash the the gun has afull battery the green light comes on the fan comes on when pressed the gas is new but the gun does not seem to want to fire it is virtually brand new i havent registered ...
I have a PASLOAD 325 IMPULSE Framing Nailer. I have cleaned, replaced gas, charged battery, and oiled. Fan runs fine. spark has been tested with firing head removed. Solid spark every time. When ...
...which is now 90 percent misfires. It cycles, it does everything OK, it fires and it releases/uses gas but produces no nail.. We put it in for a service and it worked for 9 to 12 times then straight ...
or 8 times before it will fire and shoot a nail out could need a good cleaning or I would check the gas cartridge for the expiration date. It is on the bottom. but a good cleaning would probably help.
Question about RTO Air Tools & Compressors
...and when you press the fire button the gun makes a faint thud as if trying to fire but no go. The gas is full. What should I look for look for a jammed nail in the nose assembly, also what is the ...
Question about RTO Air Tools & Compressors
does not fire the nails when you pull tjhe trigger but the gas and fan still work First, make sure you gas is not expired, it has a date on it. Next, Make sure your green light comes on. Take off the ...
Question about RTO Air Tools & Compressors
...upon tip compression, I pull the trigger, the framer does not engage (Fire). I have installed a new gas cylinder and insured the battery was filly charged First, make sure you gas is not expired, it ...
Question about Air Tools & Compressors
...there is only alight poof instead of a pop when I pull the trigger. Installed a new battery and gas. Worked fine for about 500 nails Maybe gas container is exhausted? Meybe they sold you a ...
Question about RTO Air Tools & Compressors
I changed the gas cylinder and now it won't fire any nails. check the cap to make sure properly seated on top of the cylinder and then reinsert making sure the cap lines up with the spout in the head.
366 questions posted
Usually answered in minutes!
4 Questions
9 Questions