Question about Stanley Air Tools & Compressors
...in to far, i have tried adjusting the pressure from the compressor but have had no luck is there a depth adjustment on the gun? Yes, there is a depth adjustment. Most of the Bostitch models have a ...
Question about Stanley Air Tools & Compressors
How do you set the depth on a Bostitch N57c coil nailer besides lowering the air pressure Hello. The only way to set the depth is to lower or raise the air pressure. The rn175, however does have a ...
Question about Stanley Air Tools & Compressors
Bostich RN-46 seems to be over sinking the nails even went set to low depth No matter what setting you have on the depth the gun seems to over sink the nails. Adjust the air pressure on the regulator ...
...trial nails on this reconditioned unit. Went in okay, but I unloaded, disconnected, and increased depth. Now, when I try to fire, I feel air release at trigger (on my fingers) when I depress the ...
Question about Air Tools & Compressors
...drives nails but they are sticking up about a 1/4 inch The bostitch nailer rn45 has an adjuster for depth on the front. Rotate the black knob for proper depth. If adjuster does not have an effect, ...
...a framing nailer requires about 90 psi. Hello, Most framing nailers have an adjustment for depth, by setting the length of the nose. Try pressing the locking button next to the nose piece, ...
...the board with a pneumatic brad nail gun If your nailer does not have an adjustment to reduce the depth (small thumb-wheel below trigger or on the side of the gun) you can add rubber below the ...
Question about Hitachi Air Tools & Compressors
I have a Hitachi NR83A3 framing nail gun. It won't drive nails flush. Adjusting the depth screw from one extreme to the other doesn't appear to help or change the driven nail depth. Any ideas? Serial
Question about Porter Cable Air Tools & Compressors
adjust nail depth 350 mag framing nailer To adjust the depth of the nail on the coil 350, refer to the parts list listed below. The safety foot, refrence # 430 or part # 904930 has a slot head ...
user manual paslode s350f. how to set the nail depth hello. here is the manual, look on page 5 to see how to adjust the depth. http://paslode.com/uploadedFiles/pneumatic_ops_manual.pdf kindly rate my ...
366 questions posted
Usually answered in minutes!
4 Questions
9 Questions