...air and test fire by pushing in the firing pin with your finger (dry fire onto wood or old coiled rubber hose, use very quick pushing action against trigger pin). If the gun works, replace ...
Question about Air Tools & Compressors
...fire a staple, all I get is an air leak from the area of the trigger. They all leak a little on firing. Is it a big blast of air or just a hiss? All guns have a 'safety' device that keeps them from ...
Question about Air Tools & Compressors
...air and pushed nose against wood pulled trigger and nothing happened If the trigger is set to single fire, you will need to place the gun against the work then pull trigger as you have done. Try ...
Question about Stanley Air Tools & Compressors
...fire if air is leaking past orings in head /headvalve or safety /trigger is not pushing trigger pin all the way into trigger valve. Test: Remove trigger to expose trigger valve pin. Remove nails. ...
...fire. It depends on the type of trigger and the firing valve that the trigger contacts. Remove gun from air supply and remove the nails (for safety). Take a close look at the trigger itself looking ...
...air connected, hold trigger and quickly bounce the gun against the work. If the gun does not fire when you bump, the trigger is most likely set to single fire. With trigger set to single fire, you ...
Question about Air Tools & Compressors
...air and with a very quick motion, depress the firing pin all the way in. If the gun fires adjust the safety foot. If the gun does not fire, remove the head and pull out the head valve. Lube orings in ...
Question about Stanley Air Tools & Compressors
...air leaks when you depress safety to fire gun then most likely problem is in the head valve or safety foot is not pushing the firing pin all the way in. Easy test, remove nails and remove the trigger ...
...air until I release tyhe trigger. not jammed, gun is clean, very new. acted that way right out of the box then it worked and then not and so on, worked yesterday but not today Safety foot and lever ...
fire just puffs a little air and thats it. As the contact arm and trigger inner lever wear, the trigger will not push the trigger valve pin all the way in. The pin on the trigger valve also wears. One
366 questions posted
Usually answered in minutes!
4 Questions
9 Questions
