wont spark or weld have a hobart 125 ez just bought brand new cant get it to weld or spark welder comes on but nothing and the ground is connected dont really wont to take it back lets go over the ...
...spark.I turn it off,turn it on and it does it again.The wire feed works good,it just sparks,but will not keep welding.Thanks,Jerry I have welded countless hours with Linde & Lincoln & even a ...
...between welds. Check the rectifire and/or diodes.Also could be a bad connection any where in the welding output
...welding on a high setting the spark starts out strong but seems to fizzle down and it does not burn in good. Please help MIKE You may be exceding the duty cycle of your welder Check your operstors ...
Question about Lincoln Welding Tools
...clamp surface,cleanliness( paint, rust etc) place the ground clamp as close as practicable to the welding ...
Question about Miller Welding Tools
...spark again. The ground is fine. What is causing this? Clean the plate/sheet firtst then attach the earth ensure you have fitted the same size tip as the wire, check all the switches on the set that ...
...be on the + side. Solid Wire (gas use) ground clamp to negative side. 2) If gas is used: Mild steel welding requires Argon/CO2 mix 75/25 or 90/10. Using pure CO2 you will create a lot of sparks and a ...
turns on has a full 220 but when i try to weld turns on has a full 220 but when i try to weld all i get is a faint spark wire is feeding fine is the ground wire connected?Is it a good connection?
i have a century 145 amp ..............can not get a welding spark very very light arc ,not enough to weld with thanks in advance check your ground its a ground problem
weld-pak 100 Hd Problem Every thing seem to normal but when i try to weld all i get is a weak spark. have no current (Amps) to weld with. Thanks, robert. There is a reset button located in the wire ...
36 questions posted
Usually answered in minutes!
20 Questions
6 Questions