Parks Optical 13.5hp Briggs And Stratton Intek Lawn Mower Engine "small engine kill" Questions

IF THE EARTH WIRE IS REMOVED FROM THE COIL, WHY WONT THE ENGINE STOP the small wire going to the coil is the kill switch the kill switch puts ground (earth)to it to shut the coil off

...small-guage wire. The smaller guage wire is the engine's "Kill Circuit" trigger-wire. Everything electrical that makes the engine stop running comes back to this wire. Unplug it and check for spark ...

...plug=same, no spark. Pulled the kill wire off the magneto (solenoid?) and still no spark. remove the top cover from the engine and remove the small wire from the coil if still no spark the coil is ...

...engine for ground in plug boot. What can I do to get spark back? Worked last week just fine. Disconnect small wire at ignition module. Then check for spark. If no spark, replace ignition module. If ...

...small screw at the top of the plastic throttle cover which is the adjusting screw for the throttle cable, if you loosen it, pull the throttle lever right back and push the screw down until it stops ...

...kill (stop) switch or a short in the wiring. If you replace the ignition coil the air is .010 -.012 normally on most small engines. try squrting some starting fluid in the carb if it runs and shuts ...

...a leak in the carb but no real damage. pull the top cover from the engine and follow the small wire from the coil and see if the fire melted the wire coating and its grounding out the kill switch ...

where can i find the kill switch cable for a toro lawn mower Try a rental store, or any small engine repair shop... They'd be happy to order it for you!

small wire missing from engine flywheel shroud on some engines this is stop wire and will struggle to turn off if not earthed .if your machine has several relays then try switching them around , maybe