Question about Briggs & Stratton Measuring Tools & Sensors
20 HP which is powering a Sears lawn tractor that has two blades. I don't feel the valves got bent. Thanks for the help, it is well appreciated. Did you loosen the coil when you changed the key? Check
Question about Briggs & Stratton Measuring Tools & Sensors
Ed i had a similar problem on a 20 hp v twin. there was trash in the fuel shut-off solenoid screwed in the bottom of the float bowl stopping fuel. It will come out without pulling the whole carb apart
Question about Briggs & Stratton Measuring Tools & Sensors
...20 on my John Deere riding lawn mower and it just started smoking and has a lacked power and died. Upon closer inspection I found that it would only run when I use starting fluid. I took off the OHV ...
Question about Briggs & Stratton Measuring Tools & Sensors
valve seal problem or do I need to re-ring it. Please email me at [email protected]. Thank you, Mike. IF IT WAS MINE , MIKE ,I WOULD USE A HEAVIER GRADE OF OIL-----20--60 OR THERE ABOUTS PLUS PUT A
...in the valve cover or the valve setting? Sounds like the gas cap vent may be clogged. Try running it for a bit without the cap and see if the problem goes away. If it does, then replace the gas
Question about Briggs & Stratton Measuring Tools & Sensors
...20 HP v-twin will set you back a good bit of money. The parts can be ordered either on line or you can get them at a local lawn mower parts supply. Rings are about $35.00 per cyl and the the gaskets ...
1,265 questions posted
Usually answered in minutes!