Question about Danby Dehumidifiers
...working and making a noise. Took it apart and found the noise is the pump that transfers water from the lower to upper tank. The warning indicator light is flashing with no error code. When you plug ...
...pump working again after I cleaned the water bucket and filter by flushing them repeatedly with fresh water. The lines after the pump contained cloudy water, but I figured since the pump was able to ...
the unit is leaking on the bottom and the pump has stopped working The pump and water level sensor are one piece replace the pump.
Midea. Why did pump stop working? Cleaned pump filter, checked drain hose for clog, checked drain hose connection The pump may have simply failed.
working for no apparent reason my fedders dehumidifier is hooked up to a pump, so i never have to empty it. for over 4 years, no problem.. now the light comes on, which is on the panel which indicates
...bucket fills and then the machine stops Check to ensure the hose is connected to the outlet of the pump
...pump compressor and fan start for an instant and then they stop and a failure message shows up on the thermostat. This works the same when it call for cool in the summertime. The emergency heat works ...
...pump also stopped working, and the unit is a mere 2yrs old. I called DeLonghi and they told me to take it to the nearest DeLonghi repair center, which said it would be $120 out of my pocket to repair ...
I have an whirlpool gold ad50gpusb from canadian tire. The pump will no longer pump via the clear rubber hose and instead the water accumulates in the bucket. Do you know if there is a simple fix to ...
Question about DeLonghi Dehumidifiers
...pump often stop working and F/P shows an error code until reset? The pump often stops working and shows an error code on the front panel. The dehumidifier itself continues to work fine, but then only ...
61 questions posted
Usually answered in minutes!
98 Questions
25 Questions
19 Questions
11 Questions
17 Questions