Schlage B362 605 KA4 DBL CYL DEADBOLT 4 EA 20536728 "deadbolt removal" Questions

Deadbolt wont unlock I have a deadbolt lock that locked just fine. Now when I try and unlock it, the travel of the key just stops. I have checked the obvious (key all the way in - bolt in a bind, ...

tubular design deadbolt stuck in lock position. Door cannot open. 2 piece tubular handleset has deadbolt stuck in lock position. cannot get door to open. can remove inside screws, but don't know what ...

I have a schlage deadbolt, keyed on both inside & outside but neither have any screws to remove. How do I remove the deadbolt? There should be caps over two screws above and to both sides on the ...

B362 605 KA4 DBL CYL DEADBOLT 4 EA 20536728: Gatehouse deadbolt 2 tears old.moves about 1/2 inc... Gatehouse deadbolt 2 tears old.moves about 1/2 inch but cant turn it far enough to open door. Took ...

how do you remove knob on schlage deadbolt so that you may remove faceplate to tighten screws ? turn knob as usual, there should be a hole in the bottom after you turn it. push a small screwdriver and

how do remove a schlage deadbolt that is doubled How do remove a schlage deadbolt that is doubled keyed and has no screws. Where the screws would normally be is what appears to be two pins with no way

Schlage deadbolt will not unlock even with the use of a key? New Schlage hardware was installed 6 months ago. Door now remains in locked position (frozen) for a week. Hardware is the type that is ...

remove schlage deadbolt double-cylinder deadbolt. builder grade schlage. No screws on outside or inside. only access is from panel around bolt that faces door jamb. How do I get this thing out to ...

trying to remove deadbolt keylock on inside and out I guess you would call it a doublekey lock no screws over 25 years old the inside has a push on plate to cover the screws, a little difficult to get

Schlage deadbolt installed about a month ago. The key will not turn the lock from inside but will from outside. Any suggestions? my guess is that during installation the inside lock cylinders were 1/2