Robinair Cool Tech 34700Z Recovery, Recycling, Recharging "check compressor robinaire" Questions

...you have to replace new compressor.3# Check 13'' vacuum sensor is working properly. NOTE:PLEASE CHECK FILTER CAPAICITY,BECAUSE EVERY 68Kg/150Lbs OF REFRIGERANT RECOVERY YOU MUST CHANGE SPIN-ON

...I replaced the spin on filter and compressor now I'm lost doing the same thing. Checked the recovery solenoid and its ok. Please check your machine ISV tank liquid hose,it's may lose or too ...

...the compressor. I wish this will help you to solve the the problem. if so, pls vote for it. Good luck! MY ROBINAIR 34700Z WONT DO LEAK CHECK OR VACCUM IT JUST TELL ME THAT THERE IS PRESSURE IN THE ...

...compressor.2# Check spin on-filter weight(total amount of refrigerant you have been recover since last filter changr,Max.filter Capacity is 68KG/150LBS) if it's more then max.cap. replace the spin ...

...compressor.2# Check spin on-filter weight(total amount of refrigerant you have been recover since last filter changr,Max.filter Capacity is 68KG/150LBS) if it's more then max.cap. replace the spin ...

...check 1# The compressor suction line with a vacuum gauge & make sure it has 13" HG of suction while you active recover. if not then you need to replace the compressor. 2# Check spin-on filter O ...

...equalise pressure and instruction is to press any key to exit we have replaced the main control panel Please check your unit compressor also & make sure compressoe haveing minimum 13''Hg

then 13''HG then you have to replace the compressor.3# Check all tank hose (Vaipor,Air purge & Liquid) is connected on the ISV tank quick seal.(Do not over tight).Hope this will solve your problem

you machine filter capacity,If it is more then 68kg/150lbs then change spin-on filter as soon as possible. also you can check compressor suction line & ISV tank liquid hose for any lose connection

...compressor comes on. You can do the following : 1# Rebuild/Replace ''charge'' solenoid. 2# Check ''recover'' solenoid is working properly. Repair as need. If recover solenoid is OK, Then you may have ...