Robinair Cool Tech 34700Z Recovery, Recycling, Recharging "calibrating scale" Questions

HOW DO YOU CALIBRATE THE SCALES ON A ROBINAR 34800... How do you calibrate the scales on A robinar 34800 Form the main menu go to ''CHANGE DEFAULT'' then press 5454 (old typ machine 8787 without F1 ...

...error on screen can it be reset when it starts it reads error can it be reset It often just needs recalibrating. Try turning the scale on while holding the mode/tare button with nothing on the scale. ...

during tank refilling lost power during a refill procedure now has scale error unit disabled. what do you do? With switch on press YES/ENTER & STOP/NO key at the same time and watch the screen to ...

over charges. machine seems to operate normal, but it over charges every time. I tried to recalibrate the scale. this didn't help. It seems to be your last calibration was not correct! For Robinair ...

hown to reset scale Form the main menu go to ''CHANGE DEFAULT'' then press 5454 & enter (passwoed to access default option).Once you enter to default menu,go to "SCALE CALIBRATION" & press ...

...scale and nothing will make it go away. I have tried calibrating it, but I continue to get a Cal E message and then it goes back to just E. The E message indicates the balances are not going to ...

RECALIBRATE SCALE ON ROBIN AIR MACHINE Form the main menu go to ''CHANGE DEFAULT'' then press 5454 & enter (passwoed to access default option).Once you enter to default menu,go to "SCALE ...

How do you calibrate the scale on a robinair 34700z A/C Machine? Robinair Model-34700Z,for scal calibration follow as bellow: Form the main menu go to ''CHANGE DEFAULT'' then press 5454 & YES key

...weigh max scale from calibrating at 50 grams back to 100 grams? a scale is calibrated at half it's capacity. when you use a 50 gram weight to calibrate it, it can still measure 0-100 grams

how do I recalibrate scale on Robinair 34134Z Robinair Model-34700Z scal calibration follow as bellow: Press main menu then press up or down arrow till scree appear ''CHANGE DEFAULT'' then press 5454 ...