Question about Exercise & Fitness
...start the power goes out before the belt even st I plug it in, turn on the power button in the back, the console lights up as normal. Then when I press start the power goes out before the belt even ...
Question about Exercise & Fitness
...power as well as faulty harness. Troubleshooting a Treadmill That Won't Start - Livestrong.com www.livestrong.com > Sports and Fitness Jun 6, 2015 - If your treadmill doesn't start, you will need to ...
Question about Sole Fitness Exercise & Fitness
...power, I have all connections intact at my start button. I have the motherboard exposed and all wires are intact. Start switch is bad most likely. Remove rear panel on console swap the stop and start ...
Question about Spirit Exercise & Fitness
Espirit ET-8 treadmill powers up but START button doesn't start treadmill my treadmill powers up, but when I press the START button, nothing happens. i press different settings, and those buttons ...
...metric). Press "START" to change from one type to another. Press "ENTER" one time to set the measurement unit. 7. Press "START". 8. Press "POWER" again to save and exit, once calibration is ...
Question about Treadmill Doctor Exercise & Fitness
start button is pushed the board seems to power up but the motor does not run when the start switch is engaged see the video and proceed according for fix it. However if after you did LUBE the problem
start and most times will not, even though there is still power. Then I will be on and the belt will stop turning. I can move the incline level but that is all. Hello, With the motor cover off and the
powers on but won't run powers on but won't run nordic track c 2000 starts takes off at high speed and then belts starts. board is still lit up and going as if your walking on it
...not starting While exercising, treadmill stopped,Since then, it is not starting although there is power to the board All that I can think of is to check that the motor is getting
Question about Proform Exercise & Fitness
...power on but as soon as start button is engaged it trips current. Could you help? There could be a combination of problems. I would first start with disconecting the motor leads and see if it trips ...
479 questions posted
Usually answered in minutes!
56 Questions
48 Questions
44 Questions
33 Questions