...treadmill shuts down in an intermittent pattern?there is no rhyme or reason to when it will shut down. I get an error code or nothing shows up on the panel. I have to either unplug the treadmill or ...
...treadmill shuts down in an intermittent pattern...there is no rhyme or reason to when it will shut down. I get an error code or nothing shows up on the panel. I have to either unplug the treadmill or ...
...treadmill shuts down in an intermittent pattern...there is no rhyme or reason to when it will shut down. I get an error code or nothing shows up on the panel. I have to either unplug the treadmill or ...
...treadmill smells hot and shuts down. Have had for about 1 year. If I let it set for 5 minutes will run for a little bit, smells hot and shuts down again. If you have a carpet under the treadmill it ...
treadmill shuts down and the screan says speed error 12 1) Error - "SI2 At Power Up" Symptom: Indicates the OVP (Over Voltage Protection) circuit on the controller is active and belt will not move. 2)
...treadmill shuts down in an intermittent pattern...there is no rhyme or reason to when it will shut down. I get an error code or nothing shows up on the panel. I have to either unplug the treadmill or ...
treadmill shuts off in middle of workout A treadmill will shut down from to much friction which is due to high motor current because the walkbelt and deck are not properly lubricated. I would ...
Question about Proform Exercise & Fitness
a transformer on my 29958 proform 860 qt tends to over heat and shuts down the treadmill. what is likely cause? using my tread on level 3 for 30 minutes and it shut off at 25 minutes what this?
treadmill stops during workout, shuts down. Will run for appx. 10 min. check manual for maintance on walking belt lubercation- mtr shutting down to over heating-pulling too many amps to rotate rollers
59 questions posted
Usually answered in minutes!
188 Questions
112 Questions
99 Questions
96 Questions
64 Questions
