Life Fitness T5-0 Treadmill "belt center" Questions

...belt center to the left): Turn left-side adjustment bolt counter-clockwise. Center Adjustment (moves belt center to the right): Turn the left-side adjustment bolt clockwise. An over tightened walking ...

...belt center to the left): Turn left-side adjustment bolt counter-clockwise. Center Adjustment (moves belt center to the right): Turn the left-side adjustment bolt clockwise. An over tightened walking ...

I force them to stay centered I can walk the belts back to the center, but as I walk on them, they move back to each side and slow the belts down, while continuing to fray. Tighten belt then center it

...belt over towards center. Then tighten slightly. Run treadmill on lowest speed and adjust from side to side until belt stays centered. After it seems to stay centered run treadmill on high to see if ...

...center the belt? If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt ...

...belt is off-center or slips when walked on SOLUTION: a. If the walking belt has shifted to the left, Start unit @ 1.0 mph using the hex key, turn the left idler roller bolt clockwise 1/2 of a turn to ...

...belt is off-center, first remove the keyand UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the ...

...center of the belt in a slight stomping motion,if the belt is loose you will feel it slip. To adjust a loose belt tighten each screw at back of treadmill 1/2 tun each until the slippage goes away. Be ...

center. belt wont move. I hear motor running. How do I get the belt to the center. A neighbor gave me this treadmill with no manual. It worked for a few days. Thank you for you support To get the belt

...center belt it goes off to side and rubs edge? i just lubed the belt, but when i retightened and centered belt, it goes off to one side when in use. Put machine in the upright position and check the ...