Weslo Cadence 60 SE Treadmill "stopped" Questions

treadmill automatically speeds up by itself, then slows, then stops all by itself. May go for a few minutes before stopping, or a few seconds. Time that it runs for is getting shorter. All other ...

I have precor 9.31 treadmill it is stuck saying "stop key" and will not do anything else. The stop key magnet is a bit eroded but engages fine. What could make this happen perhaps a stuck ...

was walking and pushed the incline button, accidently pulled the key out and it stopped in the incline position making a motor running noise but cannot stop it and it won't change or stop that

The treadmill does not incline. Motor runs when the button is pushed but no movement. Try Re-Calibrating 1st, here's how. With the Treadmill off, press and HOLD the SPEED UP & STOP keys, while ...

9100 life fitness treadmill have a 9100 life fitness treadmill, runs for a few minutes then stops? Sounds like you need a new lower board replacement. You can get that for that treadmill by call ...

STARTS AND THEN ITS STOPS?? When starting my exercise for about 5-minutes and its stops working. If the timer is set it will always stop at EXACTLY the same time. If the motor is overheating, it will ...

My question is, last night, I set the speed to 5mile/hr, the treadmill automatically stopped after 12mins( the belt stop, power was on). and I can not restart it immediately, Then after 5 mins, the ...

motor shroud and when you are adjusting whether the front roller is moving and the running belt has stopped (adjust back rollers) or the roller has stopped and motor is rotating ( adjust Drive Belt

Pro form 320x treadmill stops working when you get on it How can I get my Proform 320X treadmill from stopping a ... www.shopyourway.com > Manage My Life > Questions How can I get my Proform 320X ...

my pro form 380 stops while I am walking Either the walk belt is loose or the front roller pully has spun. In order to determine which one, you need to remove the moter cover and watch the drive belt ...