Landice L 7 Club Cardio Trainer Treadmill "move l7" Questions

...L7 plugged in, and after pressing the start button, nothing lights up and the belt does not move. looking for a qualified technician to check the connectors on the lower board specifically where the ...

...not start the screen is indicating "L5". i have tried unplugging and restarting, but unit does not move. please help. thx is a problem with the speed sensor or card connectors are specifically where ...

i have a problem with the belt i dont know if it moved over to one side when i run on it it makes a crazy sound this happen because the lack of maintenace . Please LUBE the deck belt+ rollers bearing ...

overspeed Your speed sensor is not working properly this part is located under the motor shroud and on top of drive motor it is attached to a bracket with 2 bolts. Unplug the unit and remove motor ...

When I turn on I get an overspeed error and machine shuts off. If I start it at a faster speed the speed fluctuates. I pressed start and menu and the LED says 3.5 but the diagnostic reads 6.8 Your ...

JKExer 8030 overspeed problem Only 8 months old, but is definetly not reading speed accurately. It doesn't skip, but has started going to fast for the speed shown on the panel. It happened after I ...

...move panel lights up Does your L7 have error code that looks like L5 , but its really LS which mean lost signal. Unplug unit take motor shroud off then plug unit back in wall outlet. When looking in ...

...place the safety or reset key into the treadmill console. Replace any parts that need replacing, or move on to the next step. 2 Locate the reset switch on the underside of the treadmill console. ...