...belt should run centered along the running bed. If the belt drifts off center, you will need to make adjustments. CAUTION: If you hear any chafing or the running belt appears to be getting damaged, ...
Question about Nordic Track Exercise & Fitness
My nordic track treadmill's walking belt stops when I start walking on it but the motor is still running although the front roller is not moving when I start walking on the walking belt. Do you think ...
Question about Exercise & Fitness
...run at 4.5 or 5.0 the belt feels at times more often than wanting, tend to slide out of place or feels like its getting caught. It's really scary when running and feels like im about to bailout ...
The motor runs but the belt doesn't turn The motor runs but the belt doesn't turn I am supposing the drive belt is running.IF the statement is o.k the problem is deck belt is worn. You ...
Question about Exercise & Fitness
how do i replace the drive belt on a roger black agw11306 Motor is running but running belt not going round Please see these links: http://www.treadmillsrepair.co.uk/2014/08/treadmill-belt-replacement
...the belt. Now it is tight. The rear roller has to be even to keep the belt from running to 1 side. If you have turned 1 side more than the other the belt will run to the other side. Hope this
Question about Nordic Track Exercise & Fitness
...run, the belt temporarily stops during each running step, causing me to trip up. I tried to lube, tighten and loosen the tread belt. The motor seems to be running fine. The belt does stop completely ...
Belt squeaking and hesitating when I run I have a Pro Form 770 EKG Treadmill. It has started squeaking when I run and occasionally hesitates when my foot lands and throws me off balance. Do I need to ...
...run about $12.00. You will have loosen the running belt, then pull off the end caps next unscrew from the top the foot rails, then unscrew and remove running deck then you will be able to replace ...
Belt stops when stepped on I just bought a used A2750. The previous owner said it worked great and it runs. However, when I step on it, the belt stops. Is this because it's in demo mode or does the ...
229 questions posted
Usually answered in minutes!
112 Questions
99 Questions
96 Questions
64 Questions
80 Questions