Electrolux EW1000i Front Load Washer "panel top loading" Questions

the washer top off the unit.Remove the two screws from inside the top of the washer front panel.Lift up on the front panel to release the catches near the bottom of the panel andremove the front panel

...It is the Atlantis MAV9750AWW. Most don't have a front panel. Just top panel and rear panel. Did you raise the top panel? There are clips there that you have to find with a flat knife type

...top panel that go through the hinge brackets(bare metal in color), then lift up the top panel and push toward the front of the washer while lifting, it may take a firm lift and push, work with it and ...

how do I open the top of my machine taws800jq1 is it front load or top load? if top load there is screws on back of top panel remove and slide panel back

...front panel off to investigate the origin of the leak? The product is the Amana model ALW780QAW Top Load Washer. NOT THE AMANA NTW5205TQ TOP LOAD WASHER. remove the 2 bottom front panel ...

...top panel should lift back on hinges after you free the front clips. Make sure you do not have to loosen any screws under the lid as some models are different. You can use a small wood wedge or a ...

...a thin blade to release clips between the top and front panel then tip the front panel towards you and lift it out yer way. Then you can remove the screws holding down the top and get to the

...panel of a top loading maytag washer? Hi, There are two spring clips located in the gap between the top and front panel. They are the edges. If the pump and hoses aare ok, fill the washer with water ...

...panel meets the washer top. Pull thin "clear" hose off left front side of outer tub. Clean the gunk out of the thin hose. Re-assemble. To prevent this from re-occuring, use a washer cleaner, such as ...

...panel and top panel.See picture #1 inserting the blade is to push the release tab in so you can lift the top away from the lower panel.There are two of these tabs located one on each side of machine ...