Question about Gateway Computers & Internet
...BIOS for setting up master ans slave drives.The hard drives have jumpers for configuring master and Slave drives.If your hard drives are IDE/PATA hard drives and you intend to install these drives on ...
Question about Micro Electronics Computers & Internet
...BIOS, and check to see that your hard drive is listed as the primary boot device. Restart your computer during the boot process you will see on the screen a certain key to press usually the Delete or ...
...bios is attempting to locate a device that it can't contact properly. You could try and get into your bios and set all IDE devices to AUTO as opposed to the specific device entries shown. You could ...
...IDE in BIOS. My computer BIOS is Phoenix AwardBIOS 6.00PG and I can change the SATA Mode to IDE by going to Integrated Peripherals > SATA Devices Configuration > SATA Mode [RAID] and change to ...
Question about Micro Electronics Computers & Internet
...device to Hard disk in the BIOS. If this is not the case, check the power and IDE cable into the hard disk for any loose connection. Check the IDE cable at the hard disk end as well as the mother ...
...device and to continue its cycle and to have an end so any faulty leads will end up with a computer error. also make sure you have set it boot from you hard drive in BIOS Restart your computer and ...
bios-69712/ if everything is okay it should show up in windows, if it doesn' then right click on my computer, select manage, then on left side select disk management, you may have to initialize and or
...bios setup go to the option boot( you can get there using arrow the arrow keys) you will see the boot sequence configure that like this: (if you want to boot from Hard-Disk) 1st boot device :Ide-Hdd ...
device and to continue its cycle and to have an end so any faulty leads will end up with a computer error. also make sure you have set it boot from you hard drive in BIOS Restart your
Question about Micro Electronics Computers & Internet
...device to your hard drive The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec master ? ...
6 questions posted
Usually answered in minutes!
14 Questions
11 Questions
3 Questions
5 Questions
2 Questions