Velbon VideoMate Deluxe Heavy-Duty Photographic/Video Tripod 607 w/ FREE UPS "camera plate" Questions

plate. you then screw the plate into the bottom of your camera or camcorder and mount the plate back onto the tripod. you can leave the plate on your camera when you store it to allow for faster setup

...legs when secured on the release plate you should be able to pull the lever away from the head and it should simply release the camera with the plate attached. Sincerely, Agent Allan Go Ahead. Use

plate with a screw to attach to the normal camera tripod screw in socket. There ought to be more than one. The screw is standard throughout the world, except maybe Germany that used to use a different

...plate, turn the camera screw upside down, screw the top plate back on its place, tighten the side screw. There are two standardized thread sizes used for camera mounts: 1/4" or 3/8" screw sizes. Some ...

...plate to attach camera is there a source for the missing plate for my kalmar video tripod? I also have the same problem. I lost the plate fo my kalmar camera tripod? Did you find the source of

...plate that is attached to the camera so it can be attached to the quick release head The plated that is screwed under the camera was lost. Where can I buy said plate? ...

camera plate from another manufacturer that offers this. Luckily this plate is a standard 'Euro' plate used by many video tripod manufacturers. For example, I know the Miller cat# 860 will take a cat#

...camera and then the plate to the tripod. Older non-quick-release tripods have a knurled screw located below the flat area where the camera is attached. If the screw is missing, get a relacement from ...

plate. What is the correct position to mount it on the camera and the tripod? Also what is the push button on the plate and how is it used? Thank you Go to this site and look at the plate mounted onto

...plate from the camera, and then, with the screw threads face up, see how it fits into the head - many times, you have to engage the spring lever, so when you set the plate inside the head, it will ...