...wont unlock so we can use it ..all the lights and buttons seem to work but ,when we follow the instructions it wont unlock .. Dear Sir:Please go to this ...
You turn it on, and the display lights, but the belt won't move at all. Does the console count down ? If so and belt wont move then you have a problem with the LCB.
move really slow, but when i stoped it to see why it was moving slow; i unpluged it and started it over; and now it wont start at all, it wont light up and is completely dead. Is there a reset button?
...lights and fan and sounds all came on but the belt wont turn and the incline doesnt go up or down. you need to check voltage going to the motors. no power ,the contoller board is not working. check ...
i moved the treadmill now it wont work Be more specific. You haven't any power on your treadmill? If you have light main-button the light is on? Or when you press start button your treadmill ...
matrix mx t4 treadmill hi there i moved my treadmill to the other side of my gym its a matrix mx t4 and the belt wont run the incline goes up and down no problem and the computer is fine its a red ...
I have recently moved my Quantum treadmill and now it wont work?! The red power light is on but nothing else? Please check your cable from upper console to lower control board. Movong treads can pull ...
...wont run or turn on ? The vibration of the move may have loosen the connectors. Unplug unit remove motor shroud you will see the motor control board pull and reconnect all connections also check the ...
horizon treadmill won't start running treadmill won't start running and the lube belt light is on. but even though i have lubricated the deck, it still won't start to run. Any info The manual said ...
...wont move console lights are on, speed buttons dont work incline button works a 5% http://www.youtube.com/watch?v=23ZgWaVEQjA ( speed sensor)Watch this videos tips: for ...
30 questions posted
Usually answered in minutes!
12 Questions
14 Questions
15 Questions
0 Questions
2 Questions