Get a rubber mallet and hit the switch on the top not too hard but it will fix it 90% of the time. I do this with all my Dysons and it works. Just a fix that cost nothing. easier than replacing switch
the scubbers do not spin Just fixed mine which had same problem. A little clear piece of plastic inside the middle of the handle had cracked. This piece holds the switch in place and is probably made ...
...on the contact. Is it something you could fix? maybe, open up where the switch is on the back there and see what is going on. If it needs a connector that you dont have, solder works too. good
...Epic 6500 power nozzle Model N109J will not work. It had an intermittent short which I thought I fixed (some of the insulation on the wires were pinched). I fixed the wires and it worked ...
Question about Dyson Vacuums
...fix the brushbar on my vacuum cleaner there are three switches - power switch , brushbar switch ,and reset switch ,the latter does'nt seem to click ,should i replace this one should i replace all ...
...switch or could it be more serious? Can I fix it or should I buy a new vacuum? If this is the switch on the hose the switch can pop out the front for inspection. If it is the switch on the vac the ...
...switch burned out frying the wires in the handle. Can I fix this myself? What parts would I need? How would I go about doing the repair? I was able to take the handle apart easily, but I do not know ...
...fix this? You will need to remove the switch cover and replace the main power switch. DysonFan had it right. I read this article and fixed it successfully: ...
...with your power cord? If you have no power, you might check up in the handle to see if one of the wires has come off of the switch and just re-attach it to the switch and that might fix your
115 questions posted
Usually answered in minutes!
184 Questions
178 Questions
164 Questions
74 Questions
69 Questions