...Both the motor and the powerhead must go together. Check it up. Leave the motor wiring connection intact. Just tinker and check the powerhead wiring connection . anyone needing parts? got 3
powerhead motor and also change internal wirings as this shorttracking may have damaged other wiring too. wow, that motor is one of the most complex in a vacuum and to repair it can be very difficult,
...powerhead. Replaced the breaker, same issue. Replaced motor, same issue. All wiring looks fine. What else could it be? Motor is working too hard because filters are blocked. see if there something in ...
when the vacuum motor is powered on. I noticed the wiring in this machien is very flimsy. I will be trying to run a separate wire along the hose to power the powerhead and see if that.
...the hose and see if you have the same problem. If that tool works fine then the problem is in the powerhead. Contrary to your advice, the nozzel cannot be connected directly to the powerhead--the ...
Question about Electrolux Vacuums
The clip that holds the EL5 powerhead to the wand has broken (again). How does one fix this? Electrolux Oxygen vacuum cleaner powerhead will not stay attached to the wand. i found this part online- ...
...is in the off position. The switch (old and replacement) works to switch between activating the powerhead and turning this off (as it should) but when it is moved to the off position, the vacuum ...
Sebo Air Belt c3.1 powerhead problem I cannot find my troubleshooting guide, and the powerhead has mysteriously stopped working. It's not jammed or anything, just not turning on. Any help is ...
Beam powerhead looses power intermittently I have a Beam central vac with a serenty plus powerhead. Recently the power to the brush/light has started cutting out intermittenly. I cleaned the contacts ...
222 questions posted
Usually answered in minutes!
178 Questions
164 Questions
89 Questions
74 Questions
69 Questions