Electrolux UltraLux 2000 Bagged Canister Vacuum "2100 parts" Questions

...parts from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10 http://www.crucialvacuum.com/catalogsearch/result/?q=LE-2100 I hope this was helpful. ...

...2100 the 1/2 inch groove at the front of the chrome handle tube begins to wear and the metal inner tube clip under the thumb button of the wand develops play back and forth. The wand comes apart into ...

...2100. hose does not say connected to the power nozzle? Cure? nothing Does it look as though it should have any form of locking? You'll frequently find spare parts in electrical shops that you could ...

...2100 vacuum. LEE is shown as model but no searches respond to this as a model number. Help. Thanks, Max Unfortunately, the Electrolux company as such no longer exists. Eureka bought the name ...

2100 vacuum cleaner This same wand is used on all older canister models since 1974 until about 1995. Metal wand, about $24. Upper wand assembly, about $34. Parts should be available at any Aerus shop.

...2100 canister shuts off and the full bag light goes on when just the hose is connected to it. It will run with nothing connected to the canister, but put your hand over just a little portion of the ...

I need a new power cord for the power nozzle on my Electrolux 2100 canister vacuum. The power nozzle has part number N115M written on the bottom. I have found the power cord for power nozzles PN6 and ...

Repair my Electrolux 2100 cannister vacuum cleaner The bag full light comes on and shuts the motor off even with a new bag installed. I have the new control to change it out but can not figure out how

...2100 foot switch inherited the above machine with a broken switch// bought the parts to fix how ever once I had taken the machine apart the switch came out in pieces // need picture from a service ...

Shuts off (overheats) after 10 minutes. Protecto relay? How to take apart? Your machine is what's called a "Special Model" and needs to be disassembled upside down in a form fitting tray, by removing ...