Electrolux Central Vacuum "shop vac suctioning" Questions

Shop vac paper filter. Vac is shopvac 86L450 bought used with no filter. I bought Shop Vac foam filter and Shop vac paper filter attached with their plastic ring. The cup designed to shut off vac when

...shop vac for suction, at the same time the space for blowing is operating. how do i stop this blowing process so i can use it as a vacuum? On the shop vac there should be 2 places to insert the hose. ...

when the hose is disconnected is very strong, but it seems to lose quite a bit of suction when the hose is connected Take it to your local vac shop and get it serviced. Most vacs need service annually

shop vac for cleaning up water you must remove the filter. The filter is for dust particles not for water I would replace your filter and dump the water out from the shop vac, Also after each time you

SHOP VAC STOPPED WORKING AFTER USING IT FOR A WHILE If by stopped working you mean that it no longer has any suction, then check the hose for a clog and also clean all the filters. If you mean that it

...and a brushroll motor. If the brush is turning but the vac motor isn't running it would not pick up anything. Could be a bad switch or a bad vac motor. Take it to your local vac shop for

shop vac or something similar with high suction and see if you can suction out your hose. There may be something so high up in it that you can't see it. The last thing I would try is to take apart the

...shop vac will it create more suction power? It uses 2 1/4 was wandering if I put 1 1/4 would it have more suction power ?? Yes, in one way the suction would be higher, but there would now be an ...