Vacuum wand gives a high pitched sound and won't suction check the hose and lower duct one is colged
it's my first time using my pro heat steam cleaner. The water or detergent seems to not be putting out at all? colgged or damaged pump, you use a proper detergent?read the instructions.
sounds like something is stuck in the vacuum but the hose is clear and the bag is new You might have a colg in the canister .
my Kirby shampooer wont foam checked hose checked tecdrive im told to check sreen is in place don't know were to look Start with the hose OFF the tank (make sure small filter is in place).Fill the ...
Loss of suction You may have a colg in the power nozzle of hose. Disconnect the hose and drop a quarter through it. Bob http://evacuumstore.com/ Had the same problem. Here is how I fixed it. Turn the ...
causing the unit to power up and suction at the end of the hose. If the suction is weak, there is a colg in the pipe. If you hear no airflow, the relay inside the unit did not energize or the motor is
dirt collects in hose but does not go to canister. I have cleaned the hose out several times and it is not colgged. The air flow indicator is showing yellow, but since we got it used, I don't know if ...
...but no succion at all. It worked fine last time I used it...what's wrong with it? You may have a colg in your hose, try blowing it out. Bob
151 questions posted
Usually answered in minutes!
184 Questions
178 Questions
164 Questions
89 Questions
74 Questions