Electrolux Epic 6500 Vacuum "replace wires back" Questions

Ad

back into the vacuum housing. Remove about a half inch of insulation from the purple and white wires and from your replacement cord unless it was supplied with insulation already removed. Use new wire

Ad

Question about Rainbow Technologies Vacuums

1 Answer

...wires and replace it with the new top cap. A 3rd hand may come in handy. Push the wiring assembly back into the switch body the same way it came out. Push the switch back into the top cap. Reassemble ...

Ad

need wiring schematic for ametek 119550 bought replacement motor which is ametek 119550 but it has more connectors than the original and need wiring schematic I had the same problem after not paying ...

Question about Fantom Vacums Vacuums

1 Answer

...XT was originally manufactured by Fantom Technologies, Inc.that closed in October 2001. The replacement for a Fantom Cyclone XTwould be Westinghouse Wired Deluxe Edition (either a WST1550 or

...replace that part? I need to remove the old one from the vacuum hose and can't figure out how to remove it and put the new one on. Thank You. Got this post off this web site...I just replaced my ...

...wires looked good but new plug did not help. We try several times and it always flips breaker on machine and on house. It never turns back on. Please Help. It sounds like you have a dead short. Check ...

Question about Hoover Vacuums

1 Answer

...replace one on my U6439-900. I took the back cover off and had to cut the wires and put new wire nuts on. Then I secured them really well with electricians tape. Might help to even put on a zip tie ...

...replace wires using replacement part given below or if you are OK with using soldering iron you may be able to repair broken wires without any expense. Best solution is to replace broken wires with a ...

Question about Vacuums

1 Answer

...replace it by your self buy a long 3 meters thick electric wire buy a plug socket for it and open the screws of the vacuum cleaner face at the back of power plug socket you will find tow screws ...

wires coming from your light bar in front and the white wire will usually have a piggy-back terminal that your white wire from the power cord attaches to as well. If there are no black dots beside the

Not finding what you are looking for?
Vacuums Logo

319 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Chris Nomland
Chris Nomland

Level 2 Expert

124 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...