Electrolux Epic 6500 Vacuum "repair power nozzle wires" Questions

power nozzle, it keeps cutting off. Do I need to replace the hose or the power nozzle? Not necessarily. It's hard to tell without checking it out. I strongly recommend taking it to an authorized Aerus

...on the power nozzle. The wires are bad to pull loose or even break inside. Take it to your local vac repair shop and have them look at it. You either have a bad wand or a bad swivel neck most

...solve the problem, it's probably a loose wire in the hose, wands or power nozzle. Could be the circuit breaker in the power nozzle. Contact your installer or a local vacuum cleaner repair

...power going to the powered accessories, as well. The problem must be due to a defective/broken "item". It could be a loose wire, a switch, or the accessory motor. It needs to be replaced, or taken in ...

power nozzle cord? Hi I have Hoover powerMAX vacuum cleaner. Its power nozzle cord got worn out and wires were torn right at the entrance to the cleaner head. I wanted to replace the cord (or at least

...power nozzle motor come on? Is it just that the brush won't turn? If it's just the brush not rotating, the belt probably broke and needs replaced. Is the brush clean? If not, clean all threads, etc. ...

...repair shop. The red button on the big power nozzle is a reset switch. Mine tripped before and I thought the nozzle died, but pressing it got it working again. The red button should be located on the ...

...power nozzle Model N109J will not work. It had an intermittent short which I thought I fixed (some of the insulation on the wires were pinched). I fixed the wires and it worked intermittently for an ...

...is wrong you must follow the flow of power all the way from the plug to the motor to see what is not working properly. If you can't figure it out I suggest you take it to a qualified repair

...power nozzle motor is working. If it is, then check the belt by trying to spin the brush. If it spins freely, the belt is broken and needs replaced. If the power nozzle motor is NOT running, there ...