Hotpoint Ariston AW125 Front Load Washer "put top scratched washing machine" Questions

...put a piece of 1/4" plywood in front of the legs, stand on the plywood and lift the front legs onto the wood. Slide the machine forward until the back legs hit the wood and tip it up on the back and ...

...put the belt back on my washing machine Please follow the step by step instructions below.....    1)  Turn off water. Disconnect electrical supply and water hoses. 2)  Remove ...

...It "pops" up by prying up with a very wide blade flat-tip screwdriver under each front corner. Putting tape on the tip of the screwdriver will minimize risk of scratching finish. Charlie There ...

...machine forward (put a rug or towel down to avoid scratching). A pair of pliers to remove a clamp and a Phillips head screwdriver will be all you need to take out the drain pump. Once out, look for ...

...top of a clean sheet to prevent any scratches. now you have to unscrew the bottom tray if any! and you should be able to gain clear access to the main motor, which will be linked to the main agitator ...

...put the machine in Service Mode and watch the RPM range. This cycle sets the display to 12 minutes. Let?s see if the wash load remains wet and what max RPM is reached. ""Maybe the pump is not turning ...

...put your machine back together. One last word of caution - the tech told me that the retaining ring has a "spring that can remove your hide" so please be very careful when removing and installing it. ...

...put on extra spin after every wash , its a 1400 spin so shouldnt need it, what is the problem and how do i fix it? you should tahe off the top and check that there is nothing scratching against the ...

...top off machine 3. Remove intake filter by removing screws and wires ( be careful of any wiring in machines as some holds a charge even when unplugged) 4. Remove soap tray compartment (be careful of ...

...put the second load in and it filled to the top with water, stopped, and displayed LF on the screen. I pushed stop 2x's to cancel the cycle and then just had it spin the loal out. It finfished the ...