Frigidaire Affinity ATF6000F Front Load Washer "e23 error code spinning" Questions

...E23 error code. The washer would go thru the wash cycle then would not spin on normal wash but would spin on spin cycle. I did clean out the filter but that didn't help. Now the washer turns on but ...

...error codes; E1: Water doesn't drain in time or not at all E21: Lid open E23: Lid not locking E31: Load imbalance E32: Check E1 and/or E31 E5: No water coming in You can try resetting to factory ...

...error code E23, it usually means one of three things: your drain pump relay has failed, a wire may be disconnected from the pump, or your main control board needs replacing. However, since you have ...

...E23 ERROR replaced control board and door lock switch, still same problem. Washer starts, runs about 15 minutes and when it goes to spin the washer stops and shuts off. Help please. Ready to throw it ...

...error codes; E1: Water doesn't drain in time or not at all E21: Lid open E23: Lid not locking E31: Load imbalance E32: Check E1 and/or E31 E5: No water coming in You can try resetting to factory ...

...error code is E23... but we checked all the hoses to the machine and nothing is clogged. e23 is not a valid code. Please re-check and post if you still need help. Thanks for using FixYa - a 4 THUMBS ...

...error E23 denotes the drain **** relay on control board is failed. Check whether there is some lose connections in the wires if nothing lose connection is there then you need to replace the control ...

...error code (E21, E23 or E24) will be displayed. If E23 or E24 are displayed, you will normally need to replace the control board due to a failed drain pump relay. If the E21 code is displayed, I ...

...Error Code E23. Does not drain, makes a humming noise on start. Does not spin or drain. take toe panel off unit than empty your pump filter... Hello Welcome to Fixya My name is Huum, E23 means Drain ...

...error code E23, it usually means one of three things: your drain pump relay has failed, a wire may be disconnected from the pump, or your main control board needs replacing. One of the best ways to ...