...pressure of more than 7000 kPa. 2) Electronic unit and washing machine housing ? Sump Any leaking water is collected in a sump in the base of the machine. A float switches off the safety valves, ...
...pressure sensor which is a red disc plastic part on the right upper side towards the back of the washer. I ran my fingers along the tube that went down and towards the back of the washer and found it ...
Question about Miele Washing Machines
...pressure is great 2+ gal in 15 secs the tub does not turn, no water runs through the soap, or into the tub. The red check inlet light comes on after 20 seconds. The fill continues but very little ...
...pressure e sensor You 'll see it a brown round shape with a hose attached to it unplug the 3 colored wires pink red and white all in single connector . Unscrew and replace it also another thing to ...
...pressure switch- must activate at the preset/chosen level to give the signal to the program controller to switch on the motor. What is most important for the motor to start functioning is that the ...
pressure switch hose that is attached to an air dome. This switch tells the washer that there is water in the tub and allows the agitator to start. Remove the control panel and you will notice a small
...red and it sounds like the drain pump is running. None of the controls is responsive, and I have tried unplugging. This happened right after installation- we had a water supply problem and got the ...
Question about Kenmore Washing Machines
...pressure switch- must activate at the preset/chosen level to give the signal to the program controller to switch on the motor. What is most important for the motor to start functioning is that the ...
22 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions