Question about Kenmore Washing Machines
...80 series washing machine.. it will not stop filling up with water.. I have to turn off the water or it will over flow. it is very used machine... Please Help... most likely a problem with the ...
...80 top load washing machine is filling very slowly in cold water settings Check the cold water supply at the water inlet valve. Remove the supply hose and check that the small screen in the inlet ...
Question about Kenmore Washing Machines
...80 series washer overfills with water and will stop unless you cut the water off Most likely solenoid in water valve is stuck open if only way to stop water is to cut off faucet. Replace water valve. ...
...80 series #23832100 does not want to use hot water, when cold shut off no water but faint electrical noise More than likely the hot water solenoid is clogged inside the water inlet valve, or the ...
...80 heavy duty from abut 1985 has a water flow problem. It started out just being the cold water now it is both. The water just dribbles out. The cold I can get to flow by turning the main water valve ...
80 series Check the solenoids at the water inlet valve. They can be tested using a multimeter or ohmmeter. Check for continuity. A lack of continuity indicates a faulty solenoid. I will attach a photo
...80, model 24832) will not fill. Water and power are on. Checked hose for kinks and screens for clogs (none). At cycle start, washer immediately begins agitating, as though it were already filled with ...
Hot water wont shut off Kenmore 80 series washer fills up,starts agitating clothes but hot water continues to fill.Any ideas? solenoid valve is jammed open replace
Kenmore 80 serise Model 110 2892 990: washed fine, then started making a terrible noise at the beginning of the drain cycle. Washer drains and fills fine, but will not agitate or spin. The sound is ...
23 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions