Electrolux AWT1012 Top Load Washer "water level different loads" Questions

water level knob is very hard to turn and the water level is not correct when filling the washer. Any thoughts? Hi. I have a Whirlpool WTW5560SQ model top-loading washer. The volume level know is very

...not stop filling in tub what would cause this The water level switch shuts the water off when it gets to the desired amount. Also change the water level to low and see if it stops at different

...water level sensor and a pressure switch the same thing The washer overfills and leaks out in extra large load mode. I intend to check the switch hose end at the tub for blockage but I'm ...

...water level in my frontload Wacher - Bosch Nexxt 500. It doesnot wash as well as I expected. I have filling that adding one or two glasses of water will make the difference, because the things inside ...

...water level in the washer to be higher on the highest level setting. Currently, there is a 6 inch gap between the water level and the top of the tub, not enough to even cover the clothes in a full ...

water level settings The temperature of your washer's water varies with your laundry care needs. Standard washer models typically feature three temperature settings: Hot/Cold, Warm/Cold, and Cold/Cold

...WATER LEVEL LOW CAN I CHANGE THE SETTING ON WATER there should be a knob on the control panel showing small, medium, large maybe even super. that is how you change the water level. Its for different ...

...water level sensor has failed and so it does not load to the level set by the program. You will need to check the level sensor to clear the water line of air block or dirt or faulty unit.Try to set a ...

...different water temp, different water levels. If this helps the tag on the upper corner of dryer reads as follows.WSM2700RAWWH RH650824W Coin or clothing in the pump Remove the filter and clean out ...