error code will be displayed. Press PAUSE/CANCEL two times to clear the display. Please Check the drain hose and make sure it is not plugged or kinked. If the drain hose if fine then unplug the washer
...washer Hi Error code SD/5d means LONG DRAIN. This error appears when the drain time exceeds 8 minutes and the water valves turn off. After 4 minutes the "Sd" error will be displayed, and then 4 ...
Question about Kenmore Elite Washing Machines
error code is displayed on this washer when the machine control board detects a suds-lock condition by analyzing the drag on the washer basket. It will be displayed while the control runs a mini-clean
Question about Kenmore Elite Washing Machines
Error Washer is taking too long to drain water from the washtub (Stored Error Code F32) Check the following: Is the drain hose or pump clogged? Is the drain hose higher than 96" to reach the drainpipe
Sd error code This could be caused by a bad pump or something stuck in the pump. This can be accessed by laying washer on front and removing pump.
error code 5d? Hi This is actually a SD code meaning to many suds. The machine will drain out mid-cycle when you push stop. You can then start the load over without adding any additional soap. Make ...
Question about Kenmore Elite Washing Machines
...washer. HELP ?F21? (AKA SD) is a Long (SLOW) Drain error (LD). If the drain time exceeds 8 minutes this error code will be displayed. In addition, a ?SUDS? error may also be displayed. This may be an ...
Question about Kenmore Elite Washing Machines
...washer mean? "F21" (AKA SD) is a Long (SLOW) Drain error (LD). If the drain time exceeds 8 minutes this error code will be displayed. In addition, a "SUDS" error may also be displayed. This may be an ...
Question about Kenmore Elite Washing Machines
...SD error right before the spin cycle. Does not seem to be spinning as quickly as it used to. any ideas? The SD error code is due to a sudsing issue. Make sure you are using the HE (High Efficiency) ...
error code will be displayed. Press PAUSE/CANCEL two times to clear the display. Please Check the drain hose and make sure it is not plugged or kinked. If the drain hose if fine then unplug the washer
1,394 questions posted
Usually answered in minutes!
3,839 Questions
0 Questions
69 Questions
45 Questions
20 Questions