change control board. if it did not drain then check for pump operation, voltage to pump? no voltage check wires and voltage out at board, this is a whirlpool cabrio, very notorious for control boards
...drain spin it would run trying to work but I could not cancel this function and would have to unplug to reset the machine I had the F 33 fault code, I pulled the drum out and found about $2.00 worth ...
Question about Kenmore Elite Washing Machines
...change even after the drain pump is on. To resolve this please make sure that the drain hose is not clogged and the pump is working. To gain access to the drain pump you can lay the machine on its ...
water level does not change after the drain pump is on. ? Is the drain hose or the drain pump clogged? ? Is the drain hose height greater than 96˝ ? ? Is the pump running? If not, see TEST #7
...Drain ld flashes when the water level does not change after the drain pump is on. Is the drain hose or the drain pump clogged? Is the drain hose height greater than 96˝ ? Is the pump
Question about Kenmore Elite Washing Machines
...change gets into the pump housing and cracks it. Not a great design should be some type of strainer on the pump. Not to hard to get the pump off the bottom and purchase a replacemnt housing though. ...
...the cycle.There is an "Ld" which related to a Long Drain when the water level doesn't change after the drain pump is on. Need to check to see if the drain hose or the drain pump is
Question about Kenmore Elite Washing Machines
hose closer to you is soft rubber and will take some patience to work with. I would pull the hoses and drain what is left of water at the bottom of the tub. Warning if the tub is full of water you are
change after the drain pump is on. Check the following: Is it oversudsed? Is the drain pump clogged? Is the drain hose kinked or clogged? Is the drain hose installed properly? Is the drain hose height
Question about Kenmore Elite Washing Machines
...change in the drain hose how can i remove it The change is probably in one of the pumps. If this is a Whirlpool Cabrio, the washer has TWO pumps. One is the drain pump, one is a recirc pump. The ...
1,394 questions posted
Usually answered in minutes!
3,839 Questions
0 Questions
69 Questions
45 Questions
20 Questions