Kenmore HE2 Plus Front Load Washer "reset washing machine computer" Questions

washing machine (QuitePack2) which has never given me a problem in 3 years. Recently, the machine is stopping with 5 minutes left in the cycle and giving me a message of "F 2". Any ideas how

...reset switch somewhere on the motor. Hello Tony, I had this same problem with my machine and found that the micro-computer board on the top rear near the cover of the machine are very prone to having ...

...machine in the first place! Interestingly, after he left, it began working perfectly again. Is there a RESET somewhere that he maybe used? It worked again for MONTHs, then began having issues again. ...

...washing, I hear what sounds like a coin behind the basket. It has also caused me to get the rL error code when running the cleaning cycle. How it gets there is hard to say but to remove it, you would ...

...reset itself but to no avail. The error is an indication a motor speed problem. You will need to check the following: - Check the wiring harness. Verify all connections between the Drive Motor, Motor ...

reset my Haier HLTW600axw Washing Machine Question edited for clarity. MAKE MODEL (WHAT IT IS) in all questions please. Category moved from Computers to Haier Washing Machines. It is a washing machine

...it again. the reset computer or CPU you must unplugged the washer from the outlet wall by 5 minutes. see the diagram, remember the washing machine is 115vCA NOT 220vca is only example.God bless ...

...washing machine, everything works, but spin cycle, time-ok, lid switch-ok, trans-ok, clutch-ok. motor spins to agitate, but when time for spin cycle, motor wont run at all, there is a start switch on ...

...of resetting so that I can close the door of the washing machine Unplug the machine, computer should reset itself. Check if the door opens when the power is turned off. Good luck ...

...Washing machine Error code E60 Fix... Press the reset button in for 5 seconds. The computer board needs resetting. You can also try to reset it by switching the machine off and unplugging it to allow ...