driver with socket attachment works wonders and will speed up this process. If the tub is held together with clips, use a screwdriver along the tub edge under each clip and pry up to remove. 15. NOTE:
side, with a big screw driver at the top of the cabinet. 6. Slide the whole cabinet forward, by grabbing each side and pulling with your hands. I see you have the whole cabinet put to the side already
...replace? How do I get the back off of the washer? This is something that can be done yourself and is very easy. First on the console you will find 2 screws depending on the model the screws can be in ...
Question about Washing Machines
driver with socket attachment works wonders and will speed up this process. If the tub is held together with clips, use a screwdriver along the tub edge under each clip and pry up to remove. 15. NOTE:
...driver as you slide the small wire back on the post, needle noses help here, too...you're done...except for the other side. It is extremely important that you hold your mouth just right at all times. ...
...replace the pump. put the filter back in and tighten it. If you had to use the hose clamp remove it now.reassemble and don't forget to give the tech his four boxes if this fixes it F/02= Long Drain > ...
Question about Kenmore HE2 Washing Machines
...side of the wire, not the spring, and stretch the spring and put the other loop over the second spring. The loop is now big enough to fit over the boot lip. Dress the loop around the boot to sit in ...
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions