Kenmore HE2 Plus Front Load Washer "power keeps shutting" Questions

...keeps running When this happens, that means the water inlet valve is not shutting off. EIther the valve is stuck or there is still power going to the valve keepng it open allowing water flow. It ...

...the house. Stuck open, wouldn't shut off. To make sure did water keep coming in after washer power shut down? If so replace w. valve...it is stuck in open position ps always keep screens in ...

Machine shuts off code F-24 Hi thereWhen you say shuts off you mean there is no power to keep it going.  Make sure that everything is connected where it should be and that the power is on.If you ...

keeps lighting up. I also see that you have to keep hitting the cancel button and are wondering if it is a safety issue. I wouldn't think it would be a safety issue. I suggest resetting your appliance

...keeps shutting off. This could be a possible issue with your control panel or the power source. I would recommend performing a reset on your refrigerator and you can do that by flipping the household ...

keeps shutting down after running for a few minutes Check the program controller unit, check if there is any loose connection to the wiring to the controller, the relay or the motor and the power plug

...power cut my washer wont work the door security light just keeps flashing! Model Hoover Vision HD Ihave a Hoover Vision HD washing machine and the "Door Security" light keeps flashing. I have looked ...

...keeps running through all the the cycles to shut it off i shut the water to the machine manually I have a Kenmore 24072 and it just flooded my kitchen due to not shutting water off.I ran it through ...

...power plug..if the water keeps filling it's the inlet valve that is going to be bad..if it stops filling it's going to be the pressure switch. The pressure switch is located in the control panel and ...

...keeps filling with water. I must run drain/spin constantly to keep the water from coming out. Hi There, Either the hot or cold (or both) water inlet valves has failed and is locked open. Keep running ...