Kenmore HE2 Plus Front Load Washer "lights" Questions

Kenmore 40448900 front load washer door light on The door light stays on after closing the door. It requires a reboot (unplug A/C cord) in order for the door light to stay off. The fault reoccurs when

flashing prewash and add garment lights My HE2 Plus will fill with water, but when the tub reaches 1/2 full, it drains, and the pre wash/add garment lights keep blinking. When the tub is drained, the ...

The Kenmore HE2 Washer Model 11046462501 Selector dial lights blink continuous with status lights Add a Garment, Rinse, Clothes Clean lights lit. What does this error mean ? This IS the code for drain

...is plugged in, power light on and won't respond to any button selections. The door opens fine but lights are locked in a HOT water, SPIN cycle selection and no error code or number is shown, just 2 ...

...a broken water pump. I tried to run the diagnostic test, but I don't think it worked. All the panel lights lit up, but then nothing happened. All the lights went out and the "clean washer" light ...

...drain, but, does not stop and start to fill--after a period of this, the door stays locked with all lights flashing. Essentially, the machine does not cycle correctly. ok, sounds like you should be ...

Our kenmore HE 2 plus washing machine which is 2 years old is experiencing the following: Both the 'add garment' light and the 'door locked' light are on at the same time indicating the machine is ...

He2 lights blinking Which lights are blinking?

Wash Cycle will not start; ADD GARMENT and DOOR LOCKED lights on. Model 110.46472500 1. Unit is POWERed on and wash cycle selected. 2. START button pushed. 3. ADD GARMENT light comes on, immediately ...

Kenmore Washing Machine model number 40448900 Light Won't Turn Off The light inside the washing machine won't turn off even when I unplug the machine. Not sure if the machine has a battery system and ...