...dust cap. I noticed oil under the washing machine. When I tipped it back I noticed oil in the dust cap that covers the transmission pulley. Is the transmission leaking oil and about to fail soon? ...
...washing at a constant low temp.Because your detergent allows u to wash at low temp u do not kill of the bacteria inside machine.put and old dust sheet in machine and add a capful of bleach DO NOT ...
...cap. plus model mav8757aww This unit has a bad squeal and I found a white flaky dust like substance on the floor and below the drum spindle. Can you help? Thanks. same problem - stopped spinning, ...
Dust Cap GE Model WJRE555OH1WW? Hi guys. I want to replace the agitator dogs in my top load GE Model WJRE5550H. However I cannot remove the dust cap above the agitator bolt. I used needle nose pliers,
Question about Washing Machines
and pull up. There is a rubber seal that has dried and gotten stuck. That should removemthe dust cap and allow you to access the 1/2" nut to remove the upper half of the agitator and replace your dogs
Question about Amana Washing Machines
...dust cap and bolt removed. Once the bolt is removed, it should be able to just pull up. It may be tough but grab it from the base and pull up with some force. Carefull not to hit your face once you ...
Question about Washing Machines
...dust cap, which cannot be grasped with fingers or tool. The only conceivable way of removing it is to use a flathead to wiggle under the edge on the sides where there's holes for the softener to flow ...
...have a whirlpool washer and agitator is not working right i try to fix it but the dust cap is stuck and don't know to get off so i can fix the washer any ideas it a top loader washer? Where is dust ...
dust cap from my GE washing machine to unscrew the agitator bolt but it wouldn't budge. I've tried turning it and using a flat head screwdriver to pry it up but it doesn't move anywhere. There appears
off. If you have a dust cap inside the agitator, remove it. This will expose the 7/16" hex head screw that attaches the agitator to the shaft. Remove the screw and the agitator will lift off the shaft
2,986 questions posted
Usually answered in minutes!
11 Questions
12 Questions