Kenmore HE2 Plus Front Load Washer "clothes model 970" Questions

...clothes. The wheel seems to be moving okay. What else could it be? sounds as if yo umay have a bad rear bearing, and the off balance of it is "throwing " the belt. magor repair, and would ck with ...

model 970-C42074-00 that is ruining my cloths, leaving grease marks on everything. Could the cause of this be bad bearings in the drum? I have tried increasing water temperature, detergent amounts and

...clothes I have a Kenmore Dryer/Washer stacked combo and the dryer seems to have a big gap between the drum on the bottom. I took it apart and there are two glides missing. Could that be a problem? I ...

...machine (Kenmore Model 970-C41062-00) is staining my clothes. They come out looking like there is a mud or oil stain on them. I have tried cleaning the rubber part but that didn't work. This

...model so I can see the schematics and location of belts etc. Sears kenmore dryer 970-c69042-00 YOU MUCH REPLACE THE FELT / GLIDES ASSEMBLY PART # 5303937139 THAT IS FOR THE UPPER ONE,THEN YOU CAN ...

...clothes, tried resetting it, wont drain or fill up, tried every setting Model # 970-c42162-00 Hi Dee. You may have a kinked drain hose or a problem with your pump check the link below section 3.3 ...

...loads and nothing. All I got was a bunch of wet dirty clothes. No spin no agitation... except for me. Model 970-C4907200 You could check motor plug has not fallen off in transit/ also belt..good ...

...clothes in it. drain pump is defective get your model number and source for a replacement pump motor........................ feed back would be good....... I fixed the problem. I had used one of the ...

...model number 970-c47092-10 doesn't drain and spin properly clothes come out dripping wet If it actually spins and does some draining but not 100%, then it is probably the drain pump that has started ...