remove the memory card. Look for a small tab along one of the long edges of the card. Slide the tab from the "LOCK" position to the "UNLOCK" position. Carefully re-insert the memory card back into the
...remove the lens cover by putting a very small flat head screw driver on the side of the lens and with the camera off pull away from the camera and it should just pop off. Superglue if you get it on ...
...superglue inside the camera bag.the shutter got splattered and it wont open.so the cam is useless.is there a possibility of getting rid of it without damaging the lens? sometimes fingernail polish ...
of Superglue or Locktite glue on the screws, but try to not remove them completely as they are easy to lose and sometimes a bit too easy to get cross-threaded! Good Luck & Best Wishes! You Can Do This
...superglue be an option, or would some other adhesive be preferable? Should I remove the mirror entirely before refixing? Any help would be most useful. Regards, Mike Absolutely. Glue away. These ...
My Dimage x60(Konica Minolta) lens cover does not turn the camera off in the closed position. I can only turn camera off by removing the battery. I had the same problem. Great little camera and never ...
superglue into the card. After it dried, I trimmed around the card with scissors and tried it out. The final test was to remove the card from the camera and insert it into my laptop to ensure that the
...remove one of the pins on wich it slides, and take the lens and the magnet out. 5) reglue the magnet and reasemble the camera. 6) power up and test, for me that solved the problem if you need more ...
...superglue 4: about 15 minutes 5. some gumption 6. a bit of sandpaper, in case you screw up step 4. step 0: You are about to void any warranty. Accept this, and move on. Take out the battery and the ...
how do you get superglue off granite counter top Try an acetone-based nail-polish remover.
111 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions