2008 Ford Focus "electric wiring towbar" Questions

...towbar into my ford Focus C Max. You can wire directly to the rear light wiring behind the trim carpets on both side, however you must use a bypass relay system on the indicator circuits as the ...

...towbar electrics for an 05 ford focus c max does anyone know the wiring colours please? (ie rear lights, indicators, brake, fog and reverse lights) ARE YOU READY L.H. STOP AND TURN ( YELLOW ) R.H. ...

...towbar electrics to my Focus C Max 58 plate, where do I begin? You can wire directly to the rear light wiring behind the trim carpets on both side, however you must use a bypass relay system on the ...

towbar wiring i need to wire single socket electrics to my 03 focus diesel estate,i have fitted the witter bar and led the cable into the boot but dont no which cables go where, please can anyone help

...towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the ...

...towbar manufacturers website. As far as electrics are concerned, I would recommend NOT using the secondhand electrics that you have unless you have a dedicated plug-in wiring kit as the wires were ...

looking for electic plug for towbar i am looking for where to plug in the electrics for a towbar.thanks There is no dedicated electric plug on this car, just wire the towbar into the rear lights.

...electric connector? if so where is it located. Thanks The Jaguar doesn't have a towbar connector as such, there is a dedicated towbar wiring kit available, this plugs into the lamp connectors and has ...

...help or do you know where i can download a wiring diagram from hi if you go onto saabscene forum and search for towbars electric i found this brill pdf am looking to fit a towbar meself to my 98 ...

...towbar electrics rather than follow a hand book wiring diagram ie; pin 1 Yellow L/H direction indicator. go to left hand cluster and locate left hand indicator wire, stip back the tape binding enough ...