2008 Toyota Yaris "2 big ends torque" Questions

2. 44 ft lbs Big end bearings. Stage 1. 11 ft lbs. Then Rotate bolt head a further by 90 degrees Head bolt torque must be done in 3 steps: 1st 22 ft lbs 2nd 43 ft lbs final 47 ft lbs use this sequence

...the main and big end bolts in sequential order and in steps two steps. - Main bearings. Stage 1. 30 Nm. Stage 2. 59 Nm. - Big end bearings. Stage 1. 15 Nm. Rotate further by 90

...Big end torques Stage 1 torque 30 - 40 Nm Stage 2 torque 64 -69 Nm Main bearing torques Stage 1 27 - 30 Nm Stage 2 54 - 59 Nm In case you need any other torques I have included a picture of them ...

...ford cortina. Big end bearings and main bearings please 1984 model Main bearings Stage 1 34-38 Nm Main bearings Stage 2 68-76 Nm Big end bearings Stage 1 26-29 Nm Big end bearings Stage 2 53-59 ...

...2 167nm Big ends Stage 1 29nm Big ends Stage 2 45 - 60 degrees Hope this helps 2.3 ENGINE MAIN BEARINGS TORQUE IS 72 FT LBS ROD BEARINGS IS 43 FT LBS. THE 2.6 ENGINE MAIN BEARING TORQUE IS 72 FT LBS ...

...are looking for the torque settings for big end bearings and main bearings on a daewoo matiz? Main bearings torques on a Daewoo Matiz 800cc (1999) Stage 1: 25-30 Nm Stage 2: 55-60 Nm Big End

...this deep you probably need one. Big end bearing - Step 1 - 29Nm Step 2 - 90 degrees Main bearing - Step 1 - 30 Nm Step 2 - 60 Nm. Cylinder Head Step 1 - 29 Nm Step 2 - 90 degrees Step 3 - 90

2 = 90 degrees 4. Big end bearings: Renew bolts / nuts = Yes 5. Big end bearings: Stage 1 = 30 Nm 6. Big end bearings: Stage 2 = 90 degrees 7. Flywheel / driveplate = 60 Nm + 90 degrees (use new bolts

...Hi I need the big ends and mains torque settings for above mentioned vehicle please MAINS renew bolts stage1- 55 NM stage 2 - 90-100 degrees BIG ENDS renew bolts stage1 - 45 NM stage2 - 90 ...

...your question?i want to know the torgue setting for mains and big ends for golf 2 a 1.8 Hi main bearing torque stage 1: 32 NM stage 2: 65 NM Big End bearing torque stage 1: 30 NM stage 2: 90* Good ...